Pirate 4x4 banner

1 - 8 of 8 Posts

·
Registered
Joined
·
4,423 Posts
Discussion Starter #1
I have a 205 T-case behind a SM465 and would like to rotate it for more clearance.I remember there was some talk of this on here a while back.Anyone done this or does anyone sell these adapters?I have an idea of how I would do this but my welding skill need help!Thanks Blazin <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
4,403 Posts
If I'm not mistaken RCKCRUZER made these and was selling them. He is normally on the Cruzah forum. <IMG SRC="smilies/skull.gif" border="0">
 

·
Registered
Joined
·
295 Posts
The only thing I've heard about clocking a 205 is w/ the ORD Doubler
 

·
Registered
Joined
·
1,102 Posts
just drill and tap new holes in the 205 case itself, plenty strong for more holes. i plan on doing this.
 

·
Registered
Joined
·
4,423 Posts
Discussion Starter #7
Not enough room for a doubler!This set up is for the CJ5.I just want to do this temporary will probally be going to a T-case I can do a 4to1 kit in when money allows.I will check out the cruiser forum.Thanks Blazin <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Zeus of the Sluice
Joined
·
4,740 Posts
Originally posted by RHINO:
<STRONG>just drill and tap new holes in the 205 case itself, plenty strong for more holes. i plan on doing this.</STRONG>

hmmm <IMG SRC="smilies/idea.gif" border="0"> that sound good! I may do just that myself. <IMG SRC="smilies/beer.gif" border="0">
 
1 - 8 of 8 Posts
Top