Pirate 4x4 banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4,104 Posts
Discussion Starter #1
seeing the cruizer buggy bob roggy built, and others running the arca series with similar setups has got me thinking. my stretched cj5 is alittle tattered from wheeling, rolling, etc and i am planing to buy a jd2 and build a buggy with my current d/train. i would like to keep the grill, hood, and front part of the body tub like the other rigs i have seen and i was just curious if anyone had any pic's from the inner floor boards of where they tie the new floor to the front part of the tub that was retained? anyone?
 

·
Registered
Joined
·
3,850 Posts
I don't have any pics but what I did was bend up some 1" tubing to form the stock floorboard and over the hump where I cut it. I spot welded the 1" tubing to the stock floor board and used that as a transition. Behind that I welded on tabs and made aluminum panels.
 
1 - 2 of 2 Posts
Top