Pirate 4x4 banner
1 - 7 of 7 Posts

·
Registered
Joined
·
7,584 Posts
Discussion Starter · #1 ·
supose one were to want coil overs in teh rear with out cutting, is that possible, im thinking move the rear back 4 more inches and just cutting large enough circles in teh floor to allow the coil over to move and down and side to side. the mount for the coil over would come off the cage somwhere! jiMMy
 

·
Registered
Joined
·
10,182 Posts
<IMG SRC="smilies/eek.gif" border="0"> Oh no!! jIMMy's gonna be getting it!! <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

Sweet!!
 

·
Registered
Joined
·
2,993 Posts
you know, the coilovers don't have to be wack ass long. I ordered the 16" travel sway a ways (get the biggest I figured). I measured my current travel and I only use about 10-12" in the rear, and that was a straight up and down measurement (5-6"up,5-6" down). Bob Roggy told me taht the currie jeep only uses 10" shocks. If you leaned them you'd get more travel for the short shock. If yor wondering, my current sett up is chevy's with a 24" mazda buggy leaf on an 85 x-cab.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top