Pirate 4x4 banner

1 - 20 of 1597 Posts

·
Registered
Joined
·
5,456 Posts
Discussion Starter #1 (Edited)
ADD YOUR COILS TO THIS THREAD

UPDATED 9/17/08

No longer need coils I have these if anybody needs them.

All have minor scratches and marks on them depending on the spring. I can get pics. They have been used but still serve their purpose very well.

12" x 250#
12" x 225#
12" x 185#
12" x 80#

14" x 250#
14" x 185#
14" x 180#

Selling them for $30 each. I can fit the 14" springs in a flat rate box so shipping for 2 or maybe 3 springs is only $10.
 

·
Registered
Joined
·
5,456 Posts
Discussion Starter #3
I can get you the 225 and the 250 if you want to buy them. 140 is pushing it and 150 would just be too much.

BTW if anybody wants to "hijack" and just put what springs you have and make this a community type spring trading thread go right ahead.
 

·
Premium Member
Joined
·
3,448 Posts
I'm going to cycle my suspension this weekend and see if I need the 225 or 250, I will let you know this weekend, but I know I need two of either one.
Thanks.
 

·
Registered
Joined
·
1,914 Posts
Here's what I have right now that I'm not using. All are 2.5ID Eibach springs

250x12-4
350x14-4
125x14-2
125x12-2
250x14-2


I am looking for.....
150x12
200x14
maybe 200x12

Aswell as 4 set of tenders with sliders.

Please PM me if you have anything I need or want anything I have. Cash or trades, whatever works.
 

·
Registered
Joined
·
5,456 Posts
Discussion Starter #10
Brink_ said:
Erik.

I have some 14" 125's I can trade you for some 14" 200's if you'd be interested.
Sounds good to me. I need some more springs in the mid range. Are both sides of your rig equal? Reason I ask is because it might help to use a 200 on one side and 180-225 on the other so they are both equal. Either way though if you want the 200's let me know.
 

·
Registered
Joined
·
1,914 Posts
Erik D_lux said:
Sounds good to me. I need some more springs in the mid range. Are both sides of your rig equal? Reason I ask is because it might help to use a 200 on one side and 180-225 on the other so they are both equal. Either way though if you want the 200's let me know.

PM sent Erik
 

·
Registered
Joined
·
2,198 Posts
check your pm's.. I'll take the 16x200's.:)
 

·
Registered
Joined
·
5,456 Posts
Discussion Starter #18
Still have all the springs. FYI I have ONE of each.

You want correct springs per side not necessarily the same spring rates on each side. For example if your rig weighs more on one side then the other you will want a heavier spring on the heavier side and a lighter spring on the lighter side.
 

·
Premium Member
Joined
·
1,558 Posts
hey man, im thinkin about 4linking the rear of my k5, and idea what id need to use to get about 9-10" of lift? rig weights about 6000lbs. if you could pm me with any ideas, that would be great. thanks man
 

·
Registered
Joined
·
1,582 Posts
I need a pair of 14" 250lbs springs for my 2"OD SAWs....

that would leave me with 2 14" 200lbs to sell or trade

Brian
 
1 - 20 of 1597 Posts
Top