Pirate 4x4 banner

1 - 3 of 3 Posts

·
Registered
Joined
·
166 Posts
Have you ever tried pulling the "short to test" wire out while in diagnostic mode?

Supposed to clear the codes stored in memory and make a fresh start without creating a "Keep Alive Memory Failed" code...

Just make sure it's spiitin codes out at you when you pull the test jumper to do it right.

Adam
 

·
Registered
Joined
·
4,670 Posts
I cleared mine by unplugging the battery for a hour and turn the lights on. This clears the adaptive memory and goes back to initial settings. I used it to clear bad tranny codes all the time.
 
1 - 3 of 3 Posts
Top