Pirate 4x4 banner

could use some help planning a Yj cage.pic attached

886 Views 1 Reply 2 Participants Last post by  UCTJ
Here's the deal (flame away if you feel the need) .. take a look at my roll cage.. STOC front half the rear has a couple of additional bars and a harness bar with a Little triangulation to the rear....




Here's what I could use a hand on right now... I am planning on buying 40 to 60 ft of 1.75" x .120 wall HREW tube to get started.. now I know this is not enough tube to do the whole thing.... I need to build in phases as $$$ and time allow... anyone care to take a crack at the "paint" version of a front cage theat I can build on with 40 to 60 feet of material.... ????
See less See more
1 - 2 of 2 Posts
http://www.pirate4x4.com/forum/showthread.php?t=564706
Have you read this thread? There is a lotta cages in there that might be what your looking for.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top