Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I am in the process of going full size on my YJ and need to get croos-over steering put on I have the Flat-top Knuckels and am looking for the best and cheapest place to get the rest done! I know it won't be cheap but I am limited on cash!
 

·
Registered
Joined
·
1,040 Posts
If you have a friend with a high steer arm see if they would take it off and trace it onto paper or cardboard. Then take the trace to a machine shop and have them cut and drill one out. Shouldn't cost more than $50 at most places. Otherwise you will be looking to spend about $100 or more on a single arm. I got mine at Sams Offroad for $150 ouch dollars, but have a template for all my friends to use.
 

·
Registered
Joined
·
7,069 Posts
I have Grady's arm with the 1" step up. My drag link clears the springs except for extreme drop and it lightly touches. I will install a 1/2" spacer under the arm for the final clearnce I need. His arms are nice.
 
1 - 5 of 5 Posts
Top