Pirate 4x4 banner
1 - 7 of 7 Posts

·
Registered
Joined
·
201 Posts
Discussion Starter · #1 ·
Ok, I finally got my hands on a 16 cm housing but cannot find out how to seperate the turbine housing from the turbo.

I tried to tap it out with a rubber mallet but I did not want to beat on it and risk damaging the fins.

I also tried to tap it from the nut (inside the turbine out) It looks like the unit may need to be pressed out, The only thing I havent tried is taking the unit apart.......

I know there is going to a real simple "trick" to it, and I am having issues figuring it out.


Matt
 

·
Registered
Joined
·
7,400 Posts
I just helped JiMMy (aka The Jerk) do one on his dodge. Take the four bolts loose and get a 4lb hammer. You aint gunna hurt the fins.....
 

·
Premium Member
Joined
·
3,299 Posts
TAP TAP TAP TAP TAP TAP WAHLA :flipoff2: easy trick and you cant damage the fins that way either :flipoff2:
 

·
Registered
Joined
·
201 Posts
Discussion Starter · #4 ·
got it this morning.....thanks

Matt
 

·
Registered
Joined
·
7,592 Posts
the housing really makes the truck more fun to drive. jiMMy
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top