Pirate 4x4 banner
1 - 15 of 15 Posts

·
Registered
Joined
·
58 Posts
Discussion Starter · #1 ·
I am looking to do a custom full cage to my 92 YJ. Does anybody have any ideas or pics of a cage they built. Any feedback or pics are appreciated...

I was just going to weld on to the original cage and add a front hoop with the four spreader bars. I would like to add the a bar behind the seat to mount the man killer (high lift) and the bars on the side of the seats.




<IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
58 Posts
Discussion Starter · #3 ·
Hey Thanks Boston

That's sweet how it turned out.

<IMG SRC="smilies/glasses.gif" border="0">
 

·
Registered
Joined
·
4,036 Posts
Originally posted by Goose:
<STRONG>I am looking to do a custom full cage to my 92 YJ. Does anybody have any ideas or pics of a cage they built. Any feedback or pics are appreciated...

I was just going to weld on to the original cage and add a front hoop with the four spreader bars. I would like to add the a bar behind the seat to mount the man killer (high lift) and the bars on the side of the seats.




<IMG SRC="smilies/biggrin.gif" border="0"></STRONG>
I would use the mount behind the seat to mount a 4 point harness, nice for the trail cause you can use just the lap belt, or for highspeed you know you will be safe! But you need to talk to some belt manufactures to make sure you get the bar in at the right height. Also what about a dash bar? this could be a good place for a grab handle for passangers too!
 

·
Registered
Joined
·
58 Posts
Discussion Starter · #5 ·
I will be adding the dash bar. My buddy talked about building the seat frames into the cage as well.
 

·
Registered
Joined
·
337 Posts
Dam MT that cage is awsome. Hey goose I sent you pictures.

BlueYJ :cool2:
 

·
Registered
Joined
·
216 Posts
Speaking of Roll Bars, is there a special TORX that you need to get the TORX of the bar that runs across the top of the door on the YJ. It has a probe/pin centered in the TORX bolt and I can't get that bastard :flipoff2: off without a special TORX I am guessing. Any ideas????:confused:
 

·
Registered
Joined
·
337 Posts
Hey Saudi,

Take a small chisel and break that pin off in the center.

BlueYJ :cool2:
 

·
Registered
Joined
·
216 Posts
Thanks bro.....appreciate it. Some times it's the simple things in life we forget..........like breaking out hammers and chisels.:cool:

Now I can finally install the rest of the roll bar pads that I bought...hehe.:p :p
 

·
Registered
Joined
·
52 Posts
Goose said:
I am looking to do a custom full cage to my 92 YJ. Does anybody have any ideas or pics of a cage they built. Any feedback or pics are appreciated...

I was just going to weld on to the original cage and add a front hoop with the four spreader bars. I would like to add the a bar behind the seat to mount the man killer (high lift) and the bars on the side of the seats.




<IMG SRC="smilies/biggrin.gif" border="0">
Here is what I did - keep in mind it would have been different if I didn't have a family.

http://www.jeepaholics.com/tech/cj7makeover/

Steve
 

·
Registered
Joined
·
58 Posts
Discussion Starter · #13 ·
MT, Thanks for the pics and the link. Your cage turned out Sweet!

Blue YJ, Thanks for the pics. That's what i was looking for!

Jeepinian, Thanks for the link!

You guys gave me some good ideas. Thanks

:beer:
 
1 - 15 of 15 Posts
Top