Pirate 4x4 banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,464 Posts
Hey!

Call Jesse at High Angle Driveline!

He is awesome on Toy d'shafts, and isn't to far from you. I would highly recommend him for any work you need done. He can answer any questions you have!

I am running CV's front and rear from Jesse, on an '87 w/ a Marlin dual case.

Mark
 

·
Registered
Joined
·
1,114 Posts
I'll second that,I'm running a IFS CV front in the rear of my truck that Jesse modified and extended .
 

·
Registered
Joined
·
3,041 Posts
Spend some extra coin and get shafts that are interchangable(front or rear). That's what I got. <IMG SRC="smilies/smokin.gif" border="0">
 

·
Registered
Joined
·
145 Posts
The 89thru95 IFS shafs are consided to be undesirable because of the large CV it's self meaning less clearance with the frame on short wheel base rigs. All can be made to work A taco shaft is #1 choice next would be 84-85 then 86-88(modified) least of all (and not recomended) would be 79-83 poor choice <IMG SRC="smilies/smokin.gif" border="0">
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top