Pirate 4x4 banner

1 - 6 of 6 Posts

·
Registered
Joined
·
92 Posts
Discussion Starter #1
ant one know if there is a comon front shaft that is 2in shorter than a stock longside chevy shaft?
Thanks Tim
 

·
Registered
Joined
·
795 Posts
Rockmonkey the long side dana 44 out of a chevy is 36.13" long the closest thing I know of to what your wanting is the 68-79 ford f150 at 33.91" a 2.220 difference about 7/32" too long but you can cut off the excess and still have full spline engagement <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
92 Posts
Discussion Starter #3
thanks tech
now i am pretty sure there isent any thing that is 4in shorter than the short side
but i might be wrong any one know?
thanks TIM
 

·
Registered
Joined
·
4,797 Posts
Originally posted by Rockmonky:
<STRONG>thanks tech
now i am pretty sure there isent any thing that is 4in shorter than the short side
but i might be wrong any one know?
thanks TIM</STRONG>
Scout II maybe, what length are you looking for, I can measure one of my spares. PM with what you need.
 

·
Registered
Joined
·
795 Posts
the 74-79 jeep wag. shortside is the shortest at a 3.62 differance as compared to the stock chevy the scout shaft is slightly longer than the waggy <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
 
1 - 6 of 6 Posts
Top