Pirate 4x4 banner

1 - 9 of 9 Posts

·
Registered
Joined
·
200 Posts
Discussion Starter #1
I found a d70 dually rear and it is the width I want.
Is anyone running one with the stock hubs, drums etc?
Will a normal 8lug wheel bolt up to it or does it need to be a dually wheel? Wondering about stud dia and the large whole?
I think the lowest gear you can run on a 60 is 7.17, is it the same for a 70? Or at least 5.87?
Thanks
 

·
Registered
Joined
·
188 Posts
7.17s are avialable for a 70 but im not sure what kind off lockers are available.
 

·
Registered
Joined
·
1,857 Posts
Any 8 lug wheel will fit the lug pattern but the center hole on chevy wheels may be too small. so you will either need aftermarket wheels(since they are universal fit) or wheels from a Dodge or Ford.
 

·
Registered
Joined
·
1,486 Posts
Originally posted by Trailhawg:
<STRONG>7.17s are avialable for a 70 but im not sure what kind off lockers are available.</STRONG>
Detroit,lock right, Arb.gear ratio goes to 7:17. Rear disc brake conversion is very easy. I have a template for the caliper bracket and can tell you the parts you need. Can be done for under 100 bucks.Pm me if interested. <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
9,295 Posts
regarding the template for disc s on a dana 70

[email protected]

hope to hear from you
sorry, but i am going to email you, PM you, and reply to the post. interested in seeing this template
 

·
Registered
Joined
·
7,592 Posts
Originally posted by Gordon:
<STRONG>are you going that wide on a cruiser? <IMG SRC="smilies/eek.gif" border="0"></STRONG>
i am too, 65 rear, 67 front! jiMMy
 

·
Registered
Joined
·
200 Posts
Discussion Starter #9
Originally posted by Gordon:
<STRONG>are you going that wide on a cruiser? <IMG SRC="smilies/eek.gif" border="0"></STRONG>
Yep, the one I found is 64" wide.
I am gonna try it for now, but will probaly go down to around 60".
 
1 - 9 of 9 Posts
Top