Pirate 4x4 banner

1 - 15 of 15 Posts

·
Registered
Joined
·
2,612 Posts
Discussion Starter #1
this guy at work tells me he knows where there is a ford truck being parted out, and it had the rr60 in it.......

so i said call your man up and tell him ill take it, he wanted between 200 and 400$

that was on thursday...


i see my bud and he said he told the guy ill take it,

so i give the guy a call, he say's ohh well i just sold it at canfeild parts swap! mother fawker! it was soo close to mine! dammnit daamnit!


ok, im done!


damnit! <IMG SRC="smilies/mad.gif" border="0"> <IMG SRC="smilies/mad.gif" border="0"> <IMG SRC="smilies/mad.gif" border="0">
 

·
Registered
Joined
·
1,456 Posts
That sucks man, I got jacked recently too. Some dooche bag wrecking yard tol me they had a dana 60 front in a fullsize chevy. I asked him a million times are you sure its a dana 60 not a 44 he was dead set on it being a 60. Well on my day off I drove all the way down there which took 2 hours and the piece of sh!t was a 44 not a 60. Then the moron continued to try and convince me it was a 60... I was pissed!!!!

<IMG SRC="smilies/pissed.gif" border="0">

[ 09-26-2001: Message edited by: Rockbuggy ]
 

·
Premium Member
Joined
·
3,151 Posts
well my sob story is that i spent 12 hours in the truck this weekend driving to idaho to get my dana 60
$775 needs hubs and a u-joint
whatcha think about that <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
737 Posts
<IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">

Andy

[ 09-26-2001: Message edited by: XJS ]
 

·
Registered
Joined
·
105 Posts
Originally posted by fcfred:
<STRONG>well my sob story is that i spent 12 hours in the truck this weekend driving to idaho to get my dana 60
$775 needs hubs and a u-joint
whatcha think about that <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>
the two i'm selling are so much closer, and they're complete <IMG SRC="smilies/wink.gif" border="0">
 

·
Registered
Joined
·
679 Posts
That was too good to be true...

Get off some money cheapskate, I ended up putting over 2k and a months dickin around time into mine, and I'm about as cheap as they come...
 

·
Old Rock Doc
Joined
·
1,782 Posts
I feel your pain, badassjeepguy, but to counter the gloom, occasionally luck happens as well. It doesn't happen to me very often, butlast month I am walking through one of the local pick and pull yards and almost literally stumble across one of the most rare, rear full floater Dana 60HD units with 1.5", 35-spline axles. I picked it up for $250 <IMG SRC="smilies/biggrin.gif" border="0"> Sure, sh*t seems to happen far too much these days, but occasionally some great stuff sneaks in <IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
350 Posts
hey, would this be in a 78 and 77 f 250 ? the 77 has huge spicer hubs AND 78 HAS FORD HUBS i can proubally get both sets for ya considering you kill shiot! let me know , there not going anywhere. or if there is a way to identify them for ya later rob
 

·
Premium Member
Joined
·
600 Posts
Well if it makes you feel better; I missed a pair of front/rear 60's out of a '78 F250 at Pick a Parts, $250 pulled and loaded on my trailer...only freaking pair I have ever seen there and I missed it <IMG SRC="smilies/crybaby2.gif" border="0">
 

·
Registered
Joined
·
6,294 Posts
Hey BAJG, i may be able to help, i know where there is a Ford junk yard, he may have what your looking for. Good prices good service too. I bought many Bronco and Mustang parts there. I am gonna get my 5.0 and NP435 there as well <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

Drop me an email [email protected]
 

·
Premium Member
Joined
·
4,526 Posts
my friend has a ford f-250 front axle, not sure ifs its a 44 or a 60 but im gonna check it out, what am i lookin for?
 

·
Registered
Joined
·
2,612 Posts
Discussion Starter #15
Originally posted by dirtrod:
<STRONG>That was too good to be true...

Get off some money cheapskate, I ended up putting over 2k and a months dickin around time into mine, and I'm about as cheap as they come...</STRONG>

ohh ill spend it if i have to, but not untill all other avenues are exhausted... patience will save me $$$$ and i got till spring to come with what i need..... <IMG SRC="smilies/biggrin.gif" border="0">

as long as im at tellico end of april beginning of may for S.M.V.
 
1 - 15 of 15 Posts
Top