Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
12 Posts
I have been running a AMC 20 for about 2 years now only problems i had was the pinion wanting to climb so i put on a track bar with a shackle on the top side and haven't had any problems. I have one piece axels and 4:88 running 33 inch TSL's which measure the same as a 35 in procomp tire. I have trussed but not welded the center i made a bracket that bolts from the truss to the diff cover to keep center from spinning. with that said I am also a conservative wheeler. I the process of a disc brake conversion on my 20. there is a great thread on here just type in model 20 dics brakes, and you will find it, Hope this helps dont forget to reinforce your diff cover cause you will hit it
 
1 - 1 of 1 Posts
Top