Pirate 4x4 banner

1 - 13 of 13 Posts

·
Premium Member
Joined
·
366 Posts
Discussion Starter #1
I've got a dana 30 out of a 1978 CJ5 for sale. It is complete from hub to hub. 4.10 gears, ARB, warn premium hubs. I was told it has chromo axles but it is the only thing I can't verify since I have never had to pull it apart. Works perfectly, pulled it to replace with a 44. $650 OBO.
 

·
Registered
Joined
·
293 Posts
another good deal on the wrong coast. that would swap nicely into my 72 cj5.
 

·
Registered
Joined
·
7,592 Posts
im a jeep tard.

5 on 5.5?
fit in 66 5? or is it wider?
 

·
Registered
Joined
·
293 Posts
yeah on the 5 on 5.5 but the spring pads may need relocating to bolt in on a 66.
 

·
Registered
Joined
·
7,592 Posts
not concernd with moving perches, its the over all width.......?
 

·
Premium Member
Joined
·
366 Posts
Discussion Starter #6
Sorry for the slow reply. Not sure what the wms to wms is, it is out of a 78 narrow track cj5. And yes, as above...5 on 5.5 lug pattern.
 

·
Premium Member
Joined
·
366 Posts
Discussion Starter #7
Oh, I forgot to include that it is complete, hub to hub, I didn't rape it of the outers like alot of guys do when they build up a Dana 44. The brakes are great, no shimmy on stops and the pads are about 80% life.
 

·
Premium Member
Joined
·
366 Posts
Discussion Starter #8
Ok, just measured it. 51" wms to wms, disc to disc.
 

·
Premium Member
Joined
·
366 Posts
Discussion Starter #11
Sure, I will sell the ARB seprately, but when you buy it you also get an axle houseing, gears, outers, and hubs for free!
 
1 - 13 of 13 Posts
Top