Pirate 4x4 banner

1 - 12 of 12 Posts

·
Registered
Joined
·
179 Posts
Discussion Starter #1
Two sets of Dana 35 axle shalves with bearings. In perfect shape. These came out of a cherokee and are non c-clip. Also have the housing with 3.53 gears and lincoln locker $50 pr set and $50 for the housing or make me an offer for all. This is a great cheap upgrade if you have a C-clip rear dana 35 and spare shalves. I ran this set up for 5 years with no breakage on 33's.
PM me or email
 

·
Registered
Joined
·
179 Posts
Discussion Starter #3
come on, I know that there are alot of you out there running stock axles and need some spare shalves.
 

·
Premium Member
Joined
·
165 Posts
Dana 35

Will this axle fit in the front of my jeep? I know it is a rear but was wondering if i put chevy knuckles on it if it would work? Thanks
 

·
Premium Member
Joined
·
19,786 Posts
*Shafts

spelling it right may help people searching for parts :)
 

·
Registered
Joined
·
14 Posts
I have a yj d35c with a c-clip elimenator kit and the shalfts had the c-clip ends cut to fit the arb and I recently had a bearing go bad and burned up the shaft will your shafts work in my housing with the arb
 
1 - 12 of 12 Posts
Top