Pirate 4x4 banner
1 - 6 of 6 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
WHO MAKES THE BEST DANA 44 AXLE SHAFTS FOR EARLY BRONCO'S? IS IT MOSER PERFORMANCE UNLIMITED OR WARN? JUST TRYING TO FIND OUT EVERYONES OPINION BEFORE I PUT DOWN THE COLD HARD CASH.
 

·
Registered
Joined
·
21 Posts
i've gotta set of the warns in f/ dana 44.74'
eb, quality is good w/ a 297 joint to boot !
price is about the same as w/ moser.my .02 <IMG SRC="smilies/grinpimp.gif" border="0"> <IMG SRC="smilies/grinpimp.gif" border="0">
 

·
Premium Member
Joined
·
7,489 Posts
I run the Moser shafts in my D44. Its in the front of an 89 Ranger, with 35's and a detroit. No problems yet, 297x joints, and a couple of a hundered dollars less than Warn. I have no complaints
 

·
Registered
Joined
·
423 Posts
When I ran a 44 I broke three of the warn shafts...but they were deffinelty stronger than the stock shafts. With the warns the axle usually stayed together when the u-joint grenaded...But I was running 38's with a 4spd and 460.
 

·
Registered
Joined
·
4,719 Posts
The mosier's sure look Beefy. I have one friend that has been running then with 38's and hasn't broken one yet.
 

·
Registered
Joined
·
138 Posts
I have been running the Warn axles in my 78 Bronco with a 460, 36's, 4.56, and a locker for 3 years with good luck. I have busted a few X297 joints but the ears on the axles survived.
 
1 - 6 of 6 Posts
Top