Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
98 RHD TJ: 4.0L/AX-15/NP231, J54/RS9”, 38s, 57:1
Joined
·
815 Posts
the snap ring is there to hold the stub against the hub. the shaft needs to be able to stay put while the hub moves the shaft in and out. float means the hub moves the shaft not the hub moves on the axle. skip the "deal".
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top