Pirate 4x4 banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
3,151 Posts
Discussion Starter #1
anyone know of a site on the web that has the breakdown of a front 60? I've seen the one on gohumvee.com but was looking for some others

also can anyone help me id this front 60? I think it is from a dodge, and I found these numbers on the tube 603643-10 11 26 9 8a

I understand that the last digits are the date but is that 79 or 89?

Also the rotor have 5/8 inch lugs and my 3/4 ton 14bolt ff rear hase 9/16th. I was hoping to make the 14 run disks.

Is it possible to drill out some 10 bolt rotors and replace the lugs with 5/8 inch lugs
 

·
Registered
Joined
·
14 Posts
I've seen people take the drums off of the 14 bolt and use all 1/2 ton GM stuff. Ordered 1/2 ton bolt on caliper mounts and used 1/2 ton rotors and calipers.
 

·
Registered
Joined
·
1,857 Posts
if it is fron a Dodge with 5/8 lugs I would bet it out of an 89 with the CTD. The 77 3/4 ton I had ,had 1/2 studs and I would think 79 would be the same.
 
1 - 3 of 3 Posts
Top