Pirate 4x4 banner

1 - 13 of 13 Posts

·
Registered
Joined
·
2,159 Posts
Discussion Starter #1
Okee, so i found me an awsome deal on a new 35 housing (well actually used - new to me), Well its from i beleeve ether a 1990-1993 YJ, and i have a dana35 on an 87 YJ, are the housings identical? and can i or should i be able to swap out my goods (ie: axles R/P breaks) and just do a direct bolt in?

Im sure my setup/swap will be ezer caus i have no c-clip crap...

LIL HELP <IMG SRC="smilies/shy.gif" border="0"> <IMG SRC="smilies/question.gif" border="0"> <IMG SRC="smilies/eyemouth.gif" border="0"> THANX
 

·
Registered
Joined
·
121 Posts
It's the perfect time to upgrade to the Waggy power! The D44 will be a pretty good swap and a lot stronger.

To answer your question: I have no clue <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
6,250 Posts
By now you have got to know the Dana 35 is a P.O.S. I broke mine on the street But yes they should be identical if it came off a Yj.. <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
2,475 Posts
I will answer this at great risk.

You should know better than to post Q's about D35s <IMG SRC="smilies/puke.gif" border="0"> around here, other than how to swap one out. <IMG SRC="smilies/rolleyes.gif" border="0">
There are places where people ask this kind of question <IMG SRC="smilies/rainbow.gif" border="0"> <IMG SRC="smilies/rainbow.gif" border="0">

Early YJs (87,88,89?) came with a non c-clip D35. The axle shafts were retained by a bearing pressed on to the axle shaft, and a retainer plate outboard of this bearing.
The later 35s used the much dreaded c-clip to retain the shafts, inside the carrier. The bearing at the end of the housing is pressed into the housing, instead of the axle shaft.
I am not sure if the housing end is the same or not. I would guess they are different.
Just to be on the safe side, I would swap in a D60 instead. <IMG SRC="smilies/thefinger.gif" border="0"> Quit wasting time and money on the 35. You can polish a turd all you want, but it is still a turd. <IMG SRC="smilies/biggrin.gif" border="0">

[ 08-26-2001: Message edited by: Robert ]

[ 08-26-2001: Message edited by: Robert ]
 

·
Registered
Joined
·
5 Posts
IT IS OUT OF A 90 YJ! I SOLD HIM THE 35 TO GET IT OUT OF MY YARD! I TRIED TO SELL HIM A 44! GOOD LUCK WITH THAT BUILD UP. IF YOU BREAK THAT ONE I WILL HAVE ONE MORE FOR SALE!
LETS GO WHEELING!!! THIS WEEKEND SWAMP LAKE. FRAMETWISTERS ARE THERE!!!
 

·
Registered
Joined
·
2,159 Posts
Discussion Starter #6
Lets see if you have a dana60 or sheet, how about some rockwells for 20$ I'll be down in 10minutes to get em. If not then shut the fwak up <IMG SRC="smilies/smile.gif" border="0"> j/k
-I dont make a lot of $$$ but i do wat i can, i wheel to wheel (have fun) not to have a egotistical head bigger than my 33's.
anyway, go have a beer <IMG SRC="smilies/beer.gif" border="0"> and start looking for a 20$ dana 60 front and rear with at minumum 4.10 gears. <IMG SRC="smilies/smile.gif" border="0">

You should know better than to post Q's about D35s around here, other than how to swap one out.
There are places where people ask this kind of question

Yo Frame Twister II, i mutch appreciate the deal, and like i we said, if ya ever need any help or i got something u need, just call, we'll work something out <IMG SRC="smilies/beer.gif" border="0">

Actually i plan on having my axle back together by friday night, so me and a bunch of guys are gonna hit barrett lake heep trail. Ur more than welcme to come! <IMG SRC="smilies/shy.gif" border="0">

Originally posted by FRAMETWISTER II:
<STRONG>IT IS OUT OF A 90 YJ! I SOLD HIM THE 35 TO GET IT OUT OF MY YARD! I TRIED TO SELL HIM A 44! GOOD LUCK WITH THAT BUILD UP. IF YOU BREAK THAT ONE I WILL HAVE ONE MORE FOR SALE!
LETS GO WHEELING!!! THIS WEEKEND SWAMP LAKE. FRAMETWISTERS ARE THERE!!!</STRONG>
<IMG SRC="smilies/shy.gif" border="0"> PEACE
 

·
Registered
Joined
·
5 Posts
I WOULD, BUT ALREADY MADE PLANS FOR THIS RUN.YOU GUYS HAVE A GOOD TRIP. DONT BREAK TO MUCH I MIGHT HAVE TO SELL YOU MORE PARTS. LIKE D60 FOR $20 AS SOON AS I CAN FIND THEM FOR $10. HEY, HOW WAS THAT BATCHLER PARTY!HAVE FUN, WHEEL HARD, AND PUT HER AWAY WET!!
 

·
Registered
Joined
·
9 Posts
Your going to have problems with a direct bolt-in... The new 35c has c-clip axles where your old one has the bearings pressed on. In a way it's better, if you, or when you snap your axle the wheel won't fly off. Unfortunately the axles only fit in the respective 35.
 

·
Registered
Joined
·
2,159 Posts
Discussion Starter #9
I talked with a guy at Rubicon express, and another jeeper at 4WP's, they both said that it will work. Im not challanging your response, im just confused as to weather its really gonna work, guess the only way to see, is "to do." so we'll see how it goes <IMG SRC="smilies/beer.gif" border="0">

Originally posted by 88YJ:
<STRONG>Your going to have problems with a direct bolt-in... The new 35c has c-clip axles where your old one has the bearings pressed on. In a way it's better, if you, or when you snap your axle the wheel won't fly off. Unfortunately the axles only fit in the respective 35.</STRONG>
 

·
Registered
Joined
·
2,475 Posts
I got rid of my 35 at the earliest possible date. Right now, I have a 60 waiting for me in Davis, free, all I have to do is arrange a day to swap it out of the guy's truck and put in his new axle. <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">

All I was trying to say was that this sight is focussed more on the hardcore side of four wheeling, and there are MUCH more appropriate places to ask about upgrading D35s, <IMG SRC="smilies/rainbow.gif" border="0"> where the people actually have done what you are asking, <IMG SRC="smilies/rainbow.gif" border="0"> and you are not likely to get flamed for asking about D35 upgrades <IMG SRC="smilies/rainbow.gif" border="0"> .

And don't worry, you don't have to twist my arm to have a <IMG SRC="smilies/beer.gif" border="0">
 

·
Registered
Joined
·
8,258 Posts
Originally posted by Robert:
<STRONG>

All I was trying to say was that this sight is focussed more on the hardcore side of four wheeling, and there are MUCH more appropriate places to ask about upgrading D35s, <IMG SRC="smilies/rainbow.gif" border="0"> where the people actually have done what you are asking, <IMG SRC="smilies/rainbow.gif" border="0"> and you are not likely to get flamed for asking about D35 upgrades <IMG SRC="smilies/rainbow.gif" border="0"> .

<IMG SRC="smilies/beer.gif" border="0"></STRONG>
so, what you're saying is that asking D35 questions is <IMG SRC="smilies/rainbow.gif" border="0">? I'd have to say YES it's FAWKING GAY <IMG SRC="smilies/rainbow.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">

I'm glad I'm not the only one to think along these lines <IMG SRC="smilies/rolleyes.gif" border="0">
 

·
Registered
Joined
·
71 Posts
Hehe, this is too funny! I'm swapping in a '87 for my '93 35C. I would have traded you!

All 35's SUCK!! But I'd prefer to have the '87 35 over the '93 35C any day!

When you break (and you will) your tire won't shoot out of the side of your jeep!

I say keep your 35, let the 35C rot. If you want a 35C housing, I'll have one REAL CHEAP!! It's got 3.07 gears in it...but other than that it's a 35C! I've even got 2 sets of axles.
 

·
Registered
Joined
·
234 Posts
Originally posted by DanH:
<STRONG>Hehe, this is too funny! I'm swapping in a '87 for my '93 35C. I would have traded you!

All 35's SUCK!! But I'd prefer to have the '87 35 over the '93 35C any day!
</STRONG>
<IMG SRC="smilies/rolleyes.gif" border="0"> so what about my '85 35C? <IMG SRC="smilies/rolleyes.gif" border="0">
 
1 - 13 of 13 Posts
Top