Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
I have search through the BB many times looking for information on this and have found ALOT of good information however I still have some questions. I would like to use the 4.3 TBI on my 258 and retain the Stock ignition setup. I know that there is a way to do this but have be fairly unlucky finding what I need to know. Does anyone have a wiring diagram as to how they did this? I know what hardware I need, what vehicle it comes out of, I know how to route everything, but the final install I have not clear on. If you can help me out it would be greatly appreciated. I am hoping to use a stock 4.3 chip with no mods, I dont care if it throughs some codes, I can work on programming later. Just want to be able to get this thing up and running, thanks for all of your help.

Kris
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top