Pirate 4x4 banner

1 - 20 of 57 Posts

·
Premium Member
Joined
·
308 Posts
Discussion Starter #1
Got some new stock!!!

Have two (2) 4.10 Dana 60 fronts, one (1) 4.56 front, Two (2) 4.56 35 spline Dana 70 FF rears. I'll mix and match single or dual wheel hubs to give you your ratio and hub of choice. Lockouts available.

Specs:
King pin, open knuckle, disk of course, complete takeout. Gears look great, . Passengers drop, standard rotation. Minor surface rust, not bad at all.

Same major dimensions as GM D60.

Representative pics:
http://www.dana60.com/rickb/ForSale/1tondodges/

Choice of 4.10 or 4.56 Fronts:
$900 EACH

With locking hubs, - add $100 (otherwise has flanges)

With 4.56 rear dana 70 - add $100 (otherwise $250 alone)

FREIGHT NOT INCLUDED.

EMAIL ME: [email protected] with a zip for a freight quote.

No rotor kickers.

No trades unless you are coming to Massachusetts in person.

Buyers with $$ in hand please.

Ask a million questions.

Rick
 

·
Premium Member
Joined
·
308 Posts
Discussion Starter #12
Don't see them go nearly that high on eBay. Fords sometimes, not Dodge.

The 70 rear is ~67" wms to wms. Need to measure precisely if you send an email to [email protected]. Centered pig.

Rick
 

·
Premium Member
Joined
·
308 Posts
Discussion Starter #13
Oh, 4.56, open, drum, 8 lug, should be 35 spline. Need to crack the cover and verify all of the above.
 

·
Premium Member
Joined
·
308 Posts
Discussion Starter #20
Yeah, what Larryboy said :D

Send zip, will quote freight!

Spend that $$ back from uncle sam.

Rick
 
1 - 20 of 57 Posts
Top