Pirate 4x4 banner
1 - 12 of 12 Posts

·
Moderating Midget
Joined
·
27,537 Posts
Discussion Starter · #1 ·
<IMG SRC="smilies/nuke.gif" border="0"> <IMG width=506 height=366 SRC="http://www.pirate4x4.com/ubb/uploads/cic5.jpg"> <IMG SRC="smilies/nuke.gif" border="0">


<IMG SRC="smilies/rolleyes.gif" border="0">
 

·
Old Rock Doc
Joined
·
1,782 Posts
BTDT <IMG SRC="smilies/biggrin.gif" border="0">

From the shape of your springs, Nolan, it looks like they have been doing a lot of wrapping. Time to get busy on that torque bar.

[ 09-24-2001: Message edited by: Medusa ]
 

·
Registered
Joined
·
17,121 Posts
hey nolan! judging from the pic you have quite the pinion angle. i figure the rear axle has'nt been in there very long (since i just got your old one) but do you have any pinion oiling problems?
<IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0">
 

·
Registered
Joined
·
1,503 Posts
That driveline looks like it came out of either the front of an FJ60 or a mini truck ?
 

·
Registered
Joined
·
240 Posts
That Pinion is pointing to the Sky <IMG SRC="smilies/biggrin.gif" border="0"> how many *?

I need a wrap bar too,I want to see what you come up with,I just need my tires,i'm getting those this week so I should have my grand unveiling next week <IMG SRC="smilies/biggrin.gif" border="0">

Rob
 

·
Moderating Midget
Joined
·
27,537 Posts
Discussion Starter · #7 ·
Hell that pinion angle is NOTHING!! I went from 33* to 22*, there will not be any problem with that.

THat is why I had to go with the Reverse Cut Dana 60 in the rear. With the clearance the 9" hybrid gave me in the front, I would LOVE to have one in the rear too.
 

·
Registered
Joined
·
240 Posts
22* do you have that seperate chamber for the pinion bearings,thats 4* more than Dyna recomends even with the extra chamber.

You trailer mostly right?

Rob
 

·
Registered
Joined
·
445 Posts
We should have never let a Toyota run in a all Jeep event.... <IMG SRC="smilies/thefinger.gif" border="0">

Nolen, you get your sheet dropped off at Tom's yet?
 

·
Registered
Joined
·
1,009 Posts
So how did you do that? It looks like the cross broke, that usually doesn't happen because of wrap, axle wrap usually busts the u joint straps off of the yoke.

Ian-
 

·
Moderating Midget
Joined
·
27,537 Posts
Discussion Starter · #12 ·
Originally posted by COMPLAINE:
<STRONG>So how did you do that? It looks like the cross broke, that usually doesn't happen because of wrap, axle wrap usually busts the u joint straps off of the yoke.
Ian-</STRONG>
Nah, it was the ears on the yoke...the driveshaft was too long and it had no play and when it wrapped I broke the ears off the slip yoke.
 
1 - 12 of 12 Posts
Top