[Brad]

Ok I got D60 full float rear hubs that had 1/2" wheel studs in them, I want to put 9/16" studs to match the front 44 I have. Do I just drill out the holes to 9/16" or do I have to have some weird size like with tapping a hole for threads?

 

[k5chevyblazer]

Cant you just weld them to the outside of the brake drum. :flipoff2:

 

[LCOwner]

Once you have the wheel studs I would measure the shoulder just below the knurl and the knurl itself and split the difference. With the studs I used, it was 5/8"
This one. Part No. 610-283

I had to machine the holes in the rotor to accept the shoulder behind the head.

 

[Brad]

the 79 D60 rotors I got have a recess on the holes about 1/16" so I dont think that will be a problem. Ill get the studs tommarow and see what I gotta do.

 

[k5chevyblazer]

Brad,

Ask Casey wheres my stuff, is he stiffing me on my soda or what? :flipoff2:

 

[Brad]

Brad,

Ask Casey wheres my stuff, is he stiffing me on my soda or what? :flipoff2:

I dunno, he lives like 10 mins from your shop call and hassle his ass.

 

[Chief yelling alot]

Why you want to change it?

probibly to match a chevy front axel

 

[Brad]

Yup, want it to match the front 8 lug chevy 44 and all the old lug studs got tossed when I took the drums off.

 

[REDDMANIAC]

try a ford front stud for a d60.

 

[Brad]

I already have the stud Part numbers, I just need to know if the holes for the studs need to be any bigger than they are.

 

[CaseyP]

Brad,

Ask Casey wheres my stuff, is he stiffing me on my soda or what? :flipoff2:

jackass:flipoff2: lack of funds dude...lack of funds...as in i have 6 cents in my account until 2morrow

 

[k5chevyblazer]

jackass:flipoff2: lack of funds dude...lack of funds...as in i have 6 cents in my account until 2morrow

I am just fawking with ya :flipoff2: