Driveline?...

657 Views 7 Replies 6 Participants Last post by marco, Aug 31, 2001

zesty_toy

Discussion Starter · Aug 31, 2001

I have an '88 pickup with SAS 4" lift...I took my front driveline to Sac Driveline and had it extended...went to put it on and the cv does not allow enough angle for it to even bolt up...

Can I use a single joint from any driveline and have it give me enough angle even when my front droops? If so, does anybody have an extra front driveline 85' and below?

All I want is a front driveline!!!
And please don't pay attention to the posts below...they did not help...
BTW I already called Jess at High Angle and he said that a clearances CV in the front will only give 35 degrees...I need around 40 degrees

[ 08-30-2001: Message edited by: zesty_toy ]

[ 08-30-2001: Message edited by: zesty_toy ]

Save

1 - 1 of 8 Posts

OOP'S

· #2 · Aug 31, 2001

Originally posted by zesty_toy:
<STRONG>I have an '88 pickup with SAS 4" lift...I took my front driveline to Sac Driveline and had it extended...went to put it on and the cv does not allow enough angle for it to even bolt up...

Can I use a single joint from any driveline and have it give me enough angle even when my front droops? If so, does anybody have an extra front driveline 85' and below?

All I want is a front driveline!!!

[ 08-30-2001: Message edited by: zesty_toy ]</STRONG>

That is why I used an 84 CV up front, the IFS cv does not have a great enough angle. You can send it to Jess at High Angle and he can modify for more angle of the dangle!!!!!
<IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0">

Save

1 - 1 of 8 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month