Pirate 4x4 banner
1 - 7 of 7 Posts

·
Moderating Midget
Joined
·
27,537 Posts
Discussion Starter · #1 ·
http://www.klunev.com/page_toyota_landcruiser.htm

I just got off the phone with Klune V and they said they designed this for the FJ-40 4 speed transmission and transfer case, both 4 speed and split.

Total driveline addition is only 8 inches!!!!

Crawlbox is $1895 and the front and rear adapters are going to run $795 (est).

I have wheeled these and they are sweet! You can have your stock "crawl" and the smooth shifting tough Land Cruiser tranny PLUS the ability to drop the bottom out by selecting the Klune.

Giddy up. If I was not 10 feet deep in an Atlas I would do a TLC 4 speed, Klune V, NP205.

Maybe on the next trail rig <IMG SRC="smilies/wink.gif" border="0">
 

·
Registered
Joined
·
10,177 Posts
Now if they would only make one to go between my SM420 and my 3 speed case!! <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> That would kick ass! <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
10,444 Posts
Originally posted by GloNDark:
<STRONG>Now if they would only make one to go between my SM420 and my 3 speed case!! <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> That would kick ass! <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>
Call them. I think they do.... Although you might have to do the 4 speed tcase. It is stronger anyway.....


8 inches huh Nolen.. Hmmmmm, I believe that would fit!!!!! Very cool!!!!!!!

Hmm where is that credit card <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
10,177 Posts
Call them. I think they do.... Although you might have to do the 4 speed tcase. It is stronger anyway.....


8 inches huh Nolen.. Hmmmmm, I believe that would fit!!!!! Very cool!!!!!!!

Hmm where is that credit card
<IMG SRC="smilies/eek.gif" border="0"> NO WAY!! I've got wood now!! What's the ratio of the Klune?? 4 to 1?? That would put me around 268 to 1 with the under drive in....DAMN!!
<IMG SRC="smilies/eek.gif" border="0"> <IMG SRC="smilies/eek.gif" border="0">

[ 09-06-2001: Message edited by: GloNDark ]
 

·
Registered
Joined
·
452 Posts
for the price I would still get the atlas.

I just cant get past the whimpy front out put
on my tlc case.

It just amazes me that it holds up at all.

how come the pinion shaft breaks more
often than the front out put shaft????
 

·
Moderating Midget
Joined
·
27,537 Posts
Discussion Starter · #7 ·
From what I understand, the front transfer case output has nearly 50% less torque delivered at the yoke than in the rear.

I don't understand it, but when I bought my Altas I paid the extra $200 to upgrade to 32 splines on the front anyway.

For the record, if I were to do it (Klune) I would do a Toyota 4 speed/Klune/NP205
 
1 - 7 of 7 Posts
Top