Pirate 4x4 banner
1 - 11 of 11 Posts

·
Registered
Joined
·
2,212 Posts
Discussion Starter · #1 ·
I need a pair or maybe 2 pair of Eaton hubs off a SRW truck with the 9/16"s studs.70'-72' only, in good shape.
 

·
Registered
Joined
·
3,437 Posts
I got a complete rear with the 9/16" studs if your interested. $75 for the pair of hubs + shipping and there yours along with any other parts need need off the axel, chrome diff cover, let me know. thanks.
 

·
Registered
Joined
·
3,437 Posts
not 100% sure on the gears but by turning the tires with it in the truck it's around a 5.13 gears and it seems to have an open diff. The gears need to be setup again as the pinion nut came loose and it started to make some noise. so we stopped driving it and swapped in a 14bolt we had in our side yard.
 

·
Registered
Joined
·
3,437 Posts
I just got out to the house to check on it again and they're actually 1/2" studs. sorry about that, I could've swore they were 9/16" If you still want it let me know.
 

·
Registered
Joined
·
1,466 Posts
I'll check my stock pile tommorrow evening and measure the eatons I have. PM me and remind me to let you know what I found.

Hillbilly
 
1 - 11 of 11 Posts
Top