Pirate 4x4 banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
5,990 Posts
Discussion Starter · #1 ·
I currently have a D44 with 30 spline axles and I'm considering building a D60 to replace it. I think most D60 fronts are also 30 spline. Will I gain enough in the strength dept to justify the cost of the 60? If so, what doner rig should I be looking for?

I'm currently running 36" SX's but have plans for 37-38.5's in the near future.

Thanks in advance for your help <IMG SRC="smilies/smile.gif" border="0">
 

·
Premium Member
Joined
·
19,779 Posts
almost eveyone i have talked to said the 78-79 250's are the best, the lete modle (80-90's) 60's leave very little room for the C bushing mount,
I think if i can't find a killer deal i will go to Dynatrac or Redline to get my 60
 

·
Registered
Joined
·
423 Posts
Almost all front D60's have 35 spline inners...it's the stub shaft that's 30 spline.

If your not sure if you need a 60 then I would say you don't. Why spend the extra money if your not breaking your 44 often.
 
1 - 4 of 4 Posts
Top