Pirate 4x4 banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
78,528 Posts
LordRatner said:
I got the Air solenoids in today, and they are 120 volt AC...

So what do I need to do to run them in my Jeep?

Thanks.

Seth, are you talking about the pressure switch with the big
gray plastic cover on it????????? If so mine said the same and
it works just fine.
 

·
Premium Member
Joined
·
78,528 Posts
Old Scout said:


I don't thin the coil in the solenoid will work, switches yes, coil no.

OS, I think Seth is talking about the air pressure actuated switch
that the 12V supply current goes through on it's way to the clutch
on the compressor pulley.


Edit: OOPS, guess not. :emb4:
 

·
Premium Member
Joined
·
78,528 Posts
Re: Re: Re: Electrical Question

LordRatner said:


No, I have 2 air solenoids, and on them they say:

Volts/HZ.............Watts
120/60................5.4
110/50


So i assume it wont work with the cars 12 volt battery

If those are the leads to the coil they won't work with 12VDC.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top