[neverenuf]

Tried doing a search but did'nt work.I'm thinking about doing one and would like to see some pics pleeeaaassssseeee
thanks
<IMG SRC="smilies/biggrin.gif" border="0">

 

[neverenuf]

What the fawk <IMG SRC="smilies/question.gif" border="0"> Is it because I'm a newbie so nobody will help out.

 

[2HITOY]

I'm not sure I've seen very many, or any at all, exo'd extended cabs on this board. The design can't be that much different from a standard cab with the exception of an extra bar or two to protect the extended portion of the cab just below the window (starting at the back part of the cab) to a connecting point of the frame or nerf bar just before the door. And its probably not because you're a newbie.......... <IMG SRC="smilies/thefinger.gif" border="0"> but it's a possibility <IMG SRC="smilies/biggrin.gif" border="0">

 

[Skyetone]

Sorry man Looked for some pix but I don't have any. Old pix off this board BTW. I will x kinda soon. Look up cages and have fun <IMG SRC="smilies/biggrin.gif" border="0">

 

[AlaskaToy]

Originally posted by neverenuf:
<STRONG>What the fawk <IMG SRC="smilies/question.gif" border="0"> Is it because I'm a newbie so nobody will help out.</STRONG>

Pretty much. This is an elitist board with a definite favor for rockcrawling. Keep trying though. There are some very helpful folks on the board. Weed out the dicks and you'll be ok.

No Exo on my ex cab. I've got the parts I need for the long awaited SAS, but will be traveling pretty far south soon, so it's on hold...again.

 

[neverenuf]

For thse of you that responded thanks. I guess I'll just make it up as I go <IMG SRC="smilies/beer.gif" border="0">

 

[Shaker]

Originally posted by neverenuf:
<STRONG>For thse of you that responded thanks. I guess I'll just make it up as I go <IMG SRC="smilies/beer.gif" border="0"></STRONG>

Do Like I did when I was deciding which way I was gonna design my 4 Runner cage. I used "Photo shop" to design a few different cage designs. I haven't exo'd a x-cab yet so I don't have any sorry. Use photo shop though so you can design your "perfect" cage....Good Luck

<IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/smokin.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0">

 

[Shaker]

I found a few in my "Library" of pics hope these help ya.....
<IMG width=493 height=332 SRC="http://www.pirate4x4.com/ubb/uploads/Ft_flex_.jpg">
<IMG width=500 height=348 SRC="http://www.pirate4x4.com/ubb/uploads/framecage.jpg">
<IMG width=550 height=412 SRC="http://www.pirate4x4.com/ubb/uploads/2570.jpg">

 

[Skyetone]

yea I do the photo shop deal also. throw up a sketch and we will help "refine" your design.

 

[Josh83]

Check out FrankenTaco's web page for some pics of his cage. If it were me, I would have added some bars for protection under the window's, but maybe thats just me. <IMG SRC="smilies/usa.gif" border="0">

 

[neverenuf]

O.K this is kinda what I had in mind
<IMG width=320 height=200 SRC="http://www.pirate4x4.com/ubb/uploads/toy cage 1.jpg">

I don't have photo shop so let's see what you guys think

<IMG width=320 height=200 SRC="http://www.pirate4x4.com/ubb/uploads/toy 33.jpg">

Thanks <IMG SRC="smilies/biggrin.gif" border="0">

 

[BRB]

i'd say
"good enuf, JUST RUN IT"

 

[ryanwhit]

Thats real similar to what i am thinking about for my '89 extra cab.

 

[Skyetone]

Nice but a little overkill on the x-cab and the bed could loose the lower bars. If not then the hell with the bed and have some fun.
If you want cage pix of just trucks thats different.

 

[Shaker]

Cage design looks pretty good. I would follow the front fender lip with the bottom bar tying it into the nerf up front. Get to bending it up!!! <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/tongue.gif" border="0"> <IMG SRC="smilies/smokin.gif" border="0">