Pirate 4x4 banner
1 - 15 of 15 Posts

·
Moderating Midget
Joined
·
27,537 Posts
Hey Lance, I took tons of film of your cruiser. I will be sure to send you copies. ALl the pictures I posted were from my digital camera.

I am holding back the film shots for a Toyota Trails article on Cruisers in ARCA.

Had a blast and I enjoyed hanging with the Pirates!
 

·
Premium Member
Joined
·
17,783 Posts
Discussion Starter · #4 ·
Originally posted by wngrog:
<STRONG>Hey Lance, I took tons of film of your cruiser. I will be sure to send you copies. ALl the pictures I posted were from my digital camera.

I am holding back the film shots for a Toyota Trails article on Cruisers in ARCA.

Had a blast and I enjoyed hanging with the Pirates!</STRONG>
I don't suppose you'd like to write an article for P4x4 too?

BAJG - Thanks. The rig worked great, but it's too top heavy (tall). I need to lower it a bit. That will be this winter's project. <IMG SRC="smilies/smile.gif" border="0">
 

·
Moderating Midget
Joined
·
27,537 Posts
Originally posted by Lance:
<STRONG>I don't suppose you'd like to write an article for P4x4 too?

BAJG - Thanks. The rig worked great, but it's too top heavy (tall). I need to lower it a bit. That will be this winter's project. <IMG SRC="smilies/smile.gif" border="0"></STRONG>
I'm glad you are going to lower it. If you are going to use those sticky pizza cutters you need to be LOW LOW and WIDE WIDE <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Premium Member
Joined
·
17,783 Posts
Discussion Starter · #8 ·
Originally posted by dncswrk:
<STRONG>Lance, any posts on the results? How did you do and how did Mike Shaffer do?

<IMG SRC="smilies/bounce.gif" border="0"></STRONG>
Mike did good, he came in 11th place. [email protected] did a great job spotting Ian Liljeblad (SP) with a kick ass 5th place. We came in a rollover intensive ( <IMG SRC="smilies/biggrin.gif" border="0"> ) 27th place. <IMG SRC="smilies/rolleyes.gif" border="0"> Actually we only rolled twice. Once on day one, and once on day two. But that's all it takes to get fawked.

I don't have all the placings, but I can tell you that Ken Shupe from South Carolina came in first. Ken did a helluva job.

[ 10-02-2001: Message edited by: Lance ]
 

·
Registered
Joined
·
131 Posts
I dig the fact that your rig still looks good after rollovers. That most be nice since they happen that often. <IMG SRC="smilies/smile.gif" border="0">
 

·
Registered
Joined
·
839 Posts
Not to be a smartass or anything <IMG SRC="smilies/thefinger.gif" border="0"> But whats with all the MT/R's? I mean I know they sponsor ARCA and everything but are they the best? Again just looking for info...
 

·
Super Moderator
'82 Scrambler, '14 Rzr
Joined
·
62,010 Posts
Uhhhh... Uhhh..... <IMG SRC="smilies/glasses.gif" border="0">

 

·
Premium Member
Joined
·
288 Posts
Lance - you DA MAN!!! Talk about awesome wheeling - don't get much better.

Thanx for the post!!

Oh to dream <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Super Moderator
'82 Scrambler, '14 Rzr
Joined
·
62,010 Posts
I personally think Lance is <IMG SRC="smilies/rainbow.gif" border="0"> and so is his <IMG SRC="smilies/rainbow.gif" border="0"> FoDee <IMG SRC="smilies/tongue.gif" border="0"> <IMG SRC="smilies/tongue.gif" border="0"> <IMG SRC="smilies/tongue.gif" border="0">
 

·
Registered
Joined
·
2,540 Posts
sure seems like people are running those MTR's at high pressures or they have a real stiff sidewall. What is the deal with that.
 

·
Premium Member
Joined
·
17,783 Posts
Discussion Starter · #15 ·
Originally posted by Gordon:
<STRONG>sure seems like people are running those MTR's at high pressures or they have a real stiff sidewall. What is the deal with that.</STRONG>
Mine worked best @ 9.5psi.
 
1 - 15 of 15 Posts
Top