[habitatxskate]

i have an 87 k10 chevy and i swapped in a 14 bolt from an 87 k20

which u joint do i need to run the 1/2 d.s. with the 1 ton rear?

i called randy's ring and pinion and they said i'd have to get my d.s. cut and have a new part welded on..

on another site i was told an s45-1350 u joint would work...i couldn't find one so i figured you guys would have an answer..

where can i order one?

 

[gilraine]

neapco 3-3140 is half 1310 half 1350.. i think that is what you need...

 

[habitatxskate]

neapco?

is it 1310? maybe s45 is a different brand or something because everywhere i looked nothing came up for that....

 

[TJVigilante]

http://www.pirate4x4.com/forum/showthread.php?t=274344

 

[habitatxskate]

thanks for the link, and i have a 208 so i need a 1330-1350? i am about to order it but idk if i need the 1310 or the 1330 now..

 

[forbergler]

Get some measurements. Compare your d-line yoke with the t-case yoke. If you didn't swap t-cases and are using your original d-line, then there isn't an issue there.

 

[habitatxskate]

no no no, i got the whole concept

1310-1350 if you have external clips on the driveshaft going to the axle, but when you have internal clips on the driveshaft going to the axle you need an 1330-1350 right? i have internal clips, and my front has external..(random but yeah)

so i need 1330...

 

[Flingarrows]

Sorry, after reading you title, i couldnt resist.... :grinpimp:

 

[habitatxskate]

hahaha thats funny...k 1330-1350 u joint..

alright, thanks guys