Pirate 4x4 banner

Ford 35 Spline/Lockout Question

726 views 4 replies 5 participants last post by  Airpup26 
I have been doing this for a long time, you say the locking hubs were modified? You need to open up the hub and see if gear is disengaging. Is the spline on the stub axle releaved at the end for the spline of the gear to slip passed? If you do not have enough room you can install a 382S inner bearing race for an extra 1/8". steve differential eng. inc.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top