Pirate 4x4 banner

1 - 4 of 4 Posts

·
blatant asshole
Joined
·
12,530 Posts
Pretty much the worst possible way to spend money but wtf ever it's your money.


Basicaly the only thing you will keep is the center housing and diff.

You need literaly every thing else. Prob cost around $5k if you buy every thing new.
 

·
Registered
Joined
·
352 Posts
not the best idea. unless you use a 28 spline 8.8, even the inner shafts would have to be custom made..but anything can be done. hell i built a dana 80 front axle for a kids jeep cj back in 1990..he wanted to have the only one.....hmmmmm
 

·
blatant asshole
Joined
·
12,530 Posts
not the best idea. unless you use a 28 spline 8.8, even the inner shafts would have to be custom made..but anything can be done. hell i built a dana 80 front axle for a kids jeep cj back in 1990..he wanted to have the only one.....hmmmmm
I did a 56" d60/d70 for a customers cj5. The p-side knuckle was touching the housing.

Now it lives a 2wd life with a hot 383 and a muncie 4spd🤣
 
1 - 4 of 4 Posts
Top