Pirate 4x4 banner

1 - 8 of 8 Posts

·
Registered
Joined
·
2,977 Posts
Discussion Starter #1
I have a few sets of Ford D44 axle shafts that fit a 1976 F-150 front d44...

I *think* these fit Full size bronco stuff too, as well as F-150's from 74 -79...

These have brand new spicer 760 joints in them, and tack welded caps (because they are stock shafts and aren't machined for full circle clips)

Inner + Brand new 760 + Outers

Will ship anywhere in continental USA...

I have to check how many I have, but I know that I have at least 1 long side assembly, and 3 short side assembly's - I may have more.

$100 for a set (long side + Short side)

$45 for a short side assembly

Located in Benicia, CA
Can deliver to Sacramento area
willing to ship if you pay the ride.
 

·
Registered
Joined
·
2,977 Posts
Discussion Starter #4 (Edited)
pics -












The long side and the 2 blue short sides have BRAND NEW Spicer SEALED 760 U-joints Tack Welded into them...

the 2 stubs one is excelent, one is okay - I'll let them go for $20 for both + the ride (one of them is FUBAR on the spindle bearing surface)

the non-painted short side will need a new u-joint, but the old one is NOT tack welded...

$100 for the long side + 1 blue short side SOLD!!!
Sold the long side and one short side...

still have 2 short sides, and 2 stubs...

one short side needs a new u-joint, the other has a BRAND new u-joint...

$35 for the good short side with BRAND NEW SPICER u-joint, inner and stub REDUCED!
$25 for the short side that needs a new u-joint (has inner and stub) REDUCED!
$15 per stub or $20 for the pair... (need u-joints) REDUCED!

(all prices are plus shipping)

Thanks!
 

·
Registered
Joined
·
2,977 Posts
Discussion Starter #7
Sold the long side and one short side...

still have 2 short sides, and 2 stubs...

one short side needs a new u-joint, the other has a BRAND new u-joint...

$35 for the good short side with BRAND NEW SPICER u-joint, inner and stub
$25 for the short side that needs a new u-joint (has inner and stub)
$15 per stub or $20 for the pair... (need u-joints)
 

·
Registered
Joined
·
2,977 Posts
Discussion Starter #8
bump...

still have 2 short side assembly's, and 2 stubs...
 
1 - 8 of 8 Posts
Top