Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,168 Posts
Discussion Starter #1
Could not find this easily when I was looking, so here is one for the archives.

Housing -70
3rd member-115
portal GB-59
knuckles/tierods/draglink-93
disk rotor/hub/center bolt-36
GM caliper/bracket/pads/pins-18.5
inner axle/Cv-15.5/17.5

Total-538
 

·
Registered
Joined
·
11,078 Posts
Cool! thanks.

Is this for a stock, narrowed, or hybrid?
 

·
Registered
Joined
·
1,168 Posts
Discussion Starter #3
Eveything stock, cept disks (and hubs) of course.
 

·
Registered
Joined
·
1,168 Posts
Discussion Starter #5
Yes, 404. Didn't have the rear one apart for any reason. Not much different except beefy (read heavy looking) cast extension housings where knuckles would go and no CV's. I'd say 50, maybe 75lb lighter tops, but that is a pure guess (subtract tie rods/draglink/knuckles/CV's, add cast ext housings and slightly longer inners).
 
1 - 5 of 5 Posts
Top