Don't know if the 454 TBI is any higher of a pressure
than the 350 is... which is ~15psi. I sat in NAPA and
went through thier books and found a ~$60 in-line pump.
Works fine. I used rubber fuel lines for both source &
return. I did use the hardline from the TBI unit for about
18 inches, but put a flare on the end and double hose
clamped it.
than the 350 is... which is ~15psi. I sat in NAPA and
went through thier books and found a ~$60 in-line pump.
Works fine. I used rubber fuel lines for both source &
return. I did use the hardline from the TBI unit for about
18 inches, but put a flare on the end and double hose
clamped it.
