Pirate 4x4 banner
1 - 3 of 3 Posts

·
Registered
Joined
·
877 Posts
Discussion Starter · #1 ·
Alright I have searched and searched but no cigar.
Heres the deal I have a YJ here that is a 1989 with the 2.5liter 4cy, It has TBI injection. The motor calls for 14-17lbs at the TBI but the stock pump produces 30-46lbs. So what inline would you think that would work. A TBI pump may work but the regulator may not think it is geting enough fuel, or a inline with more presure may over work the regulator. So do you all know of a pump that would be proper for this system. The Ford rail pump produces about 60lbs so I am thinking that it will over fuel the motor or regulater.


Thanks for your help

Nick
 

·
Registered
Joined
·
877 Posts
Discussion Starter · #3 ·
I looked into that route but I don't want more things to fail or more parts to carry for spares. Plus the added $$$. If I can't find a pump then I may go that route. I think I may try the Ford rail pump with the retun line and see what happens.

Thanks, Keep it comeing
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top