Pirate 4x4 banner
1 - 6 of 6 Posts

·
Premium Member
Joined
·
1,033 Posts
Discussion Starter · #1 ·
Lotsa talk about bringing the tank in from the top and fabbing a cover to make room for the rear pumpkin on full compression, would like to see some similar pic's. Looks do-able with a small body lift and proper bump stop placement any sucess storys or nightmares welcome. 86cj7/5.3/4l60e/d300/d60f/r
 

·
Registered
Joined
·
316 Posts
Well, its not a CJ, but this is what I did with the XJ.

Used the tomken skid, cut hole in floor, braced, and welded. Extended fuel and vent line done. Still have to enclose it.




Also, some of the local club members, have just moved the entire tank to the rear of the their TJ or CJ. No cutting what so ever, however they do not you a rear seat anymore.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top