Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
335 Posts
Discussion Starter · #1 ·
the full hydro system is running too hot for my liking without a cooler in the system. I picked up a nice big tranny cooler that should work nicely between the steering valve and reservoir, but I'm wondering about the fittings: They're just standard 3/8" hose fittings with the lip for a hose clamp.

Everything else I have is AN/jic fittings. I can't imagine that much pressure on the return to the reservoir that some hose clamps wouldn't hold, but before I start cutting hydraulic hoses just thought I'd throw the question out there....
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.