Pirate 4x4 banner
1 - 2 of 2 Posts

· Registered
Joined
·
3,676 Posts
Not sure if there's a kit complete for this but it should be easy enough to get some highsteer arms, mill and drill ( i assume you have flattops?), I'd say use d60 tre's, get weld in's from Poison Spider for 1.5 .250 dom and make your own tie rod and draglink, Get a pittman arm from Sky reamed for the d60 tre's, put it all together. Piece of cake.:)
 

· Registered
Joined
·
3,676 Posts
RoKAHype said:
Do you have to move the steering box forward when you put a D44 or D60 with high steer and use the rear springs up front from a 93 P/U?
I'd search for this. I would think that any time you use rears up front you're gonna have to move the box.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top