Pirate 4x4 banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
19,771 Posts
i belive the hub holes are a little to small on the stock wheels? am i correct

(don't own a ranger or a heep)
 

·
Registered
Joined
·
1,271 Posts
Discussion Starter · #6 ·
These wheels were off a 93ish heep, I dont remember the exact year and my ranger is a 98.. so its probably just something with the newer rangers... maybe the drums and calipers are a little bigger or stick out a little more than on the <98 rangers.
 

·
Wish it was my job!
Joined
·
2,106 Posts
Originally posted by Retard:
<STRONG>These wheels were off a 93ish heep, I dont remember the exact year and my ranger is a 98.. so its probably just something with the newer rangers... maybe the drums and calipers are a little bigger or stick out a little more than on the <98 rangers.</STRONG>
I put a set of stock ranger wheels with 31's on them on my buddy's stock TJ, had to take a die grinder to the lip on the inside of the hole in the wheel though cause they didn't fit over the flanges on the jeep axles.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top