[JeepJukka]

im swapping d44 to front of my Mj, i planning to use 4.27 gears in it, so can i use Toyota 4.30 in rear, with out breaking anything?


anybody runnin this setup?


( i did search, but no good answers....)

 

[Little Red Zuk]

Gear ratio difference is acceptable. (1% difference between front and rear)

 

[JeepJukka]

I would be weary about running on pavement in 4x4 with gearing that is off, but with 1.00% off you should be fine.

Im mostly using full-time in my np-242 in pavement, if theres need for 4x4....

 

[steve gerstner]

In the early 60's, ford used a dana 44 front with 3.92 and the 9" rear with 3.89, some were fulltime 4x4. steve differential eng. inc.