Pirate 4x4 banner

1 - 3 of 3 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter #1
Is anybody having problems with their front driveline if you meet the following criteria

Any year solid axle vehicle with a 4" lift possibly with a flexy suspension, toy axles, no dual cases NO DUAL CASES

I need to see if it is okay to use a non clearenced cv 85 front driveline...just want to make sure that the cv will have enough angle to allow the axle to drop to it's farthest point...If not...is a single u-joint my best bet?
 

·
Registered
Joined
·
8,128 Posts
No problems on mine and it has a wee bit of flex but its a square shaft with the stock ends, axle moved 3" forward
 

·
Registered
Joined
·
1,050 Posts
You should post this as a driveline Q.
I run(ran) an 85 standard cv front driveline with a hommade extention on my wagged 85. 18 inches of wheel travel and no bind, just slip. 86 and up cv's are bigger and offer less angle.
 
1 - 3 of 3 Posts
Top