Going SOA/shackle reversal on a CJ5 with YJ springs

4916 Views 21 Replies 12 Participants Last post by mike, Aug 28, 2001

On_The_Rocks

Discussion Starter · Aug 26, 2001

Iam going to do SOA on my 71 CJ5 with some 2.5" lift YJ springs and also do shackle reversal at the same time. For the spring mounts on the frame should i buy some or build some? I know i will need brake lines drivelines spring perches maybe steering.

Where should i get the spring perches from? Also any other help you can give me.

Thanks Todd <IMG SRC="smilies/jeep1.gif" border="0">

Save

1 - 1 of 22 Posts

jeeplvr

· #9 · Aug 27, 2001

In my case shackle reversal advantages are too many to list...well maybe only two.

1 - No more plowing dirt with the shackles.
2 - Better on road manners.

My approach angle should be better by 3" in the front after shackle reversal.

Save

1 - 1 of 22 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month