Does the case look similar to a 208? It should be a variant of one. The bolt pattern should be the round 6 with 23 splines. Make sure the stickout's right and you're good to go. I would bet it's just fine. The adapter is most likely the same one on Waggy's.
Got the new jeep home
Here it is finally. Got it home and within 5 minutes had it running. The 6 cylinder deisel purs like a kitten. It does have a tranfercase that looks like an np 231 with a slip yoke eliminator already installed but the tag says its a model 198 am 1 with a 2.61 low range. The auto tranny looks like a huge torqueflite. And it has dana 44 8 lug hubs on the front. Its pretty generic. The transfer case has the ability to shift out of low range and has a front output as well. The rear is a dana 70 geared to hell. Does any one know about the transfer case? It looks to have the same bolt pattern as a dana 300 and the 231. If it is 23 spline I will throw on a dana 300, find a 60 front and 4 link the rear.
