Pirate 4x4 banner

Got the new jeep home

1640 Views 20 Replies 15 Participants Last post by  4x4 Pete
Here it is finally. Got it home and within 5 minutes had it running. The 6 cylinder deisel purs like a kitten. It does have a tranfercase that looks like an np 231 with a slip yoke eliminator already installed but the tag says its a model 198 am 1 with a 2.61 low range. The auto tranny looks like a huge torqueflite. And it has dana 44 8 lug hubs on the front. Its pretty generic. The transfer case has the ability to shift out of low range and has a front output as well. The rear is a dana 70 geared to hell. Does any one know about the transfer case? It looks to have the same bolt pattern as a dana 300 and the 231. If it is 23 spline I will throw on a dana 300, find a 60 front and 4 link the rear.


See less See more
1 - 1 of 21 Posts
If I remember right those CJ10's have a 2WD version of the 208 that is locked into low. I have heard that it is fairly easy to convert these to a standard 208 that functions normally. enjoy your new toy!
1 - 1 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.