Pirate 4x4 banner

1 - 2 of 2 Posts

·
Registered
Joined
·
238 Posts
Discussion Starter #1
2002 4.0 Wrangler auto. It is very hard to get into and out of low range....grinds the gears most of the time.......any suggestions?
 

·
Registered
Joined
·
591 Posts
I would guess that you have a little lift and the transfer case linkage is binding or out of adjustment. That was the case with my '03. I tried adjusting the rod out for the linkage and wasn't stidfied with the results. Some research will show that there are a couple linkage relocation brackets out there. I bought one from Advanced Adapters; it cured my transfer case shifting issues.
 
1 - 2 of 2 Posts
Top