[cybersniper]

I have a Range Rover 727 with the output adaptor and adaptor housing that fits over the chrysler 23 spline output shaft so that it attaches to the LR trasfer case. I need the Chrysler rear output housing so i can use it atached to my YJ NP231 23 spline input.

Perfect for using a Chrysler 727 in your LR or Rangie.

Also i have the Range Rover transfer case with center diferential lock. Will exchange for Jeep trasfer cases, Klune V or similar.

Eduardo

 

[ROVER JUNKIE]

you will also need the main/output shaft from the same trany as you get the housing from as they are differant lengths

 

[cybersniper]

I disaasembled it and IT FITS !!!!!!!!

Under the rover adaptor lies a regular 23 spline chrysler out put.

ALL I NEED now is the Jeep 727 output housing or make my own from the rover parts cur down to the new output lenght, and new round NP231 pattern.
:grinpimp:

Eduardo

 

[ROVER JUNKIE]

yes it is 23 spline but it is not the same length

http://www.pirate4x4.com/forum/showthread.php?t=61972&highlight=jeep+output

lr 727 and scout 727 are the same