Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter · #1 ·
hi i know you guys are toyota guys but i have a 1985 nissan with the marlin crawler sas kit. i put the vented rotors and v6 brake calipers from marlin as well but the nissan master cylinder was to small so i had to pump the brakes to make them work. so then i went with a toyota power booster and the fj80 1" bore master cylinder. so now i have to pump them up three times before they work and th peddle is really easy to push so any info would be great.
 

·
Registered
Joined
·
57 Posts
Discussion Starter · #3 ·
yes i did bench bleed it and my tcase is right in the middle and it isnt a hardbody they have the tcase on the drivers side
 

·
Registered
Joined
·
57 Posts
Discussion Starter · #4 ·
could my brake booster from the junk yard be bad and if anyone knows how long my push rod should be from firewall to peddle
 

·
Registered
Joined
·
57 Posts
Discussion Starter · #8 ·
hey i had no brakes for two months bleed it about 30 times before i relized my calipers were on the wrong sides. the bleeder valve should be on top so the air doesnt get trapped. i swithced them and bleed them in 15 minutes and worked great. hope this is the problem
 
1 - 4 of 4 Posts
Top